TUBE AMP REPAIR AND SERVICE

$129 SERVICE FEE (FLAT RATE)

Any Brand • Professional Tube Amp Repair

Parts additional when needed. No hidden fees.

Dallas Area Pickup & Delivery Available – $40

All work is performed by Elan Memran, a Yamaha Certified Specialist renowned for master-level amp repairs and custom modifications that deliver legendary tone.

PROFESSIONAL TUBE AMP SERVICE

To give you ultimate peace of mind, every single amplifier that hits our bench undergoes a rigorous quality, performance, and safety protocol.

🔍 Comprehensive Visual Diagnostics
We perform a thorough internal inspection looking for burnt components, leaking capacitors, fractured solder joints, and damaged wiring.

⚡ Complete Safety & Grounding Check
We verify the chassis ground, correct fuse ratings, and power cable integrity to ensure your amp is safe to operate.

🔬 Pre & Post Bench Testing
We evaluate your amplifier’s performance on an oscilloscope and audio analyzer both before and after the repair to track improvements.

🎯 Component-Level Precision
Faulty components are replaced with premium, high-grade parts precisely matched to your amplifier’s original factory specifications.

🧼 Potentiometer & Jack Cleaning
We refine old solder joints, clean, and lubricate all dusty or scratchy control pots, switches, and input/output jacks.

🎸 Final Play-Testing Burn-In
Your amp undergoes a real-world audio stress test to ensure it maintains stable tone, dynamics, and thermal performance under a true gigging load.

THE 7 STEPS OF A PROFESSIONAL TUBE AMP REPAIR

Ever wonder exactly what happens when your amplifier is placed on Elan’s workbench? Here is our step-by-step master process:

1️⃣ Safe Discharge & Inspection

Tube amplifiers store lethal voltages (up to 500V+ DC) inside their filter capacitors, even when completely unplugged. The very first step is safely draining this residual voltage to ground and verifying the chassis is completely safe before conducting a physical inspection.

2️⃣ Power Supply & Voltage Testing

The amplifier is powered up safely using a variable transformer (Variac) while closely monitoring current draw. Voltage levels are measured at critical nodes, including the plate, screen, and preamp stages, to ensure the power transformer and rectifiers are delivering clean, stable power.

3️⃣ Tube Testing & Evaluation

Every vacuum tube is tested for shorts, gas leaks, transconductance, and structural wear. Preamp tubes like 12AX7s are checked for microphonics and noise, while power tubes like 6L6s or EL34s are evaluated to ensure they draw current evenly.

4️⃣ Signal Path Troubleshooting

If the amplifier has a weak, distorted, or missing audio signal, an audio signal generator injects a clean sine wave into the input. An oscilloscope is then used to trace the wave through each stage of the preamp, tone stack, phase inverter, and output section to pinpoint exactly where the signal degrades.

5️⃣ Component Replacement & Solder Refinement

Faulty or drifted components, such as dried-out electrolytic filter caps, noisy carbon-comp resistors, or cracked solder joints, are cleanly de-soldered. High-quality replacement parts are precisely installed to structural, factory-certified standards.

6️⃣ Power Tube Biasing

Whenever power tubes are replaced or the power circuit is repaired, the amplifier’s bias is adjusted. This fine-tunes the idle current passing through the power tubes, helping prevent them from running too hot (“red-plating”) or too cold, which can cause harsh crossover distortion.

7️⃣ Soak Testing & Quality Assurance

The repaired chassis is hooked up to a dummy load and run at performance volumes for an extended “burn-in” period. This ensures that heat-sensitive components are fully stabilized and that the amp will deliver reliable performance on stage or in the studio.

💰 HOW WE KEEP OUR RATES HIGHLY COMPETITIVE

Many musicians ask how we provide master-level, certified work at prices that beat the big commercial repair shops. The answer is simple:

We pass our operational efficiency directly onto you.

⚙️ Direct Master Expertise — No Middlemen

When you bring your amp to a large retail store or commercial service center, you pay a markup to cover service coordinators, desk staff, and other operating costs. Here, all work is performed directly by Elan Memran. You bypass the retail middleman and pay for diagnostic and bench time.

⏱️ Decades of Troubleshooting Experience

In electronics repair, time is money. With over 40 years of audio engineering experience and specialized diagnostic equipment, Elan can efficiently isolate the root cause of circuit problems instead of blindly replacing components.

🏢 Low Overhead, High Value

We choose to invest in professional diagnostic tools, oscilloscopes, and an in-house inventory of premium components rather than an expensive retail storefront.
Our low overhead helps us keep our bench rates competitive.

📦 In-Stock Component Inventory

Because we build custom boutique amplifiers, we purchase high-grade components such as premium capacitors, resistors, and vacuum tubes in quantity. This helps reduce delays and unnecessary parts-ordering costs.

🚗 DALLAS AREA PICKUP & DELIVERY

Don’t have time to drop off your heavy tube amp or gear? Let us handle the heavy lifting.

We offer convenient door-to-door pickup and delivery throughout the Greater Dallas area for only $40 total.

💰 Flat-Rate Pricing
$40 total covers both pickup and return delivery of your equipment.

📍 Coverage Area
Available for residential and commercial addresses throughout the Greater Dallas Metroplex.

🛡️ Safe & Secure Transport
Your valuable tube amplifiers and high-end gear are carefully loaded, padded, and transported securely.

📅 Flexible Scheduling
Fill out the form below to coordinate a morning or afternoon time slot that fits your schedule.

NEED YOUR AMP REPAIRED?

Tell us about your amplifier and the problem you’re experiencing.

Fill out the form below and we’ll contact you about your repair.